5445 double jet wiring problem

Discussion in 'Technical Side of Things' started by Marv666, Sep 24, 2020.

  1. Marv666

    Marv666 Gretschie

    Jul 26, 2020
    Hi, does someone have the wiring diagram to the 5445. (should be the same to the projet).
    I tried to install a leftover classic plus in the bridge but that didn´t work.
    So now i tried to put the blacktop filtertron back in but it doesn´t work.
    Neck pickup still works but nothing happens with the bridge.
    Seems like i messed something up but i have no idea what it is.
  2. SpaceCowboy

    SpaceCowboy Electromatic

    Aug 16, 2019
    I put a Classic and an HS Filter'tron in my 5445 and it was pretty straight-forward, just removing the Blacktops and replacing the wires to the switch. I had to reverse the wires on the Classic to get it in phase with the Filter'tron, but that doesn't sound related to the issue you're having. Can you post a picture of your switch wiring?
  3. Bubbalou88

    Bubbalou88 Electromatic

    Sep 25, 2020
    Dallas-Ft.Worth Texas
    You may have damaged the Bridge Volume Pot bt to much heat from iron. Suggest test it with ohmmeter and use hemostats or alligator clip on the wire lugs when soldering. Also use 60-80 watt iron for soldering ground to case back so solder will flow quickly and get off quickly
    Medium John likes this.
IMPORTANT: Treat everyone here with respect, no matter how difficult!
No sex, drug, political, religion or hate discussion permitted here.