First hand wired PTP I built

First hand wired PTP I built

  • 1
  • 1
Finished - Fender Champ 5F1 Circuit

Finished - Fender Champ 5F1 Circuit

  • 0
  • 0
Everything done but the back cover.

Everything done but the back cover.

  • 0
  • 3
Final wiring during loc-tite stage - notice cleaned up / shortened power leads (black/white, yellow, and red)

Final wiring during loc-tite stage - notice cleaned up / shortened power leads (black/white, yellow, and red)

  • 0
  • 0
Loc-tite stage. A dab on the breadboard bolts and transformer bolts.

Loc-tite stage. A dab on the breadboard bolts and transformer bolts.

  • 0
  • 0
See - it works ! The pilot light gem is glowing red !

See - it works ! The pilot light gem is glowing red !

  • 0
  • 1
Complete but not finished. It works, but noisily. It needs shorter leads, couple of cold solders/missed solders repaired, loc-tite, and general clea

Complete but not finished. It works, but noisily. It needs shorter leads, couple of cold solders/missed solders repaired, loc-tite, and general clea

  • 0
  • 0
Shot while doing ancient chinese secret chopstick test. Sure to find missed solders, cold solders, and bad components.

Shot while doing ancient chinese secret chopstick test. Sure to find missed solders, cold solders, and bad components.

  • 0
  • 0
Board wiring complete, needs pilot light and fuse to finish power circuit.

Board wiring complete, needs pilot light and fuse to finish power circuit.

  • 0
  • 0
Notice the voltage divider circuit on the 1 & 2 inputs. That was hard to figure out, but I took apart a 62 Showman and copied it, since I couldn't fi

Notice the voltage divider circuit on the 1 & 2 inputs. That was hard to figure out, but I took apart a 62 Showman and copied it, since I couldn't fi

  • 0
  • 1
Hire this guy for your next amplifier project.

Hire this guy for your next amplifier project.

  • 0
  • 0
Look at that handy work.

Look at that handy work.

  • 0
  • 0
I took this close up - I have NO IDEA WHY ! It must have been a good idea at the time.

I took this close up - I have NO IDEA WHY ! It must have been a good idea at the time.

  • 0
  • 1
2 solders down, 98 to go. Give or take.

2 solders down, 98 to go. Give or take.

  • 0
  • 0
My living room work bench. There is a fire extinguisher off to my left.

My living room work bench. There is a fire extinguisher off to my left.

  • 0
  • 0
Inventory complete, ready to start work.

Inventory complete, ready to start work.

  • 0
  • 0
Always take inventory before starting a project !

Always take inventory before starting a project !

  • 0
  • 0
That big ol' box just for these 2 small things?

That big ol' box just for these 2 small things?

  • 0
  • 0
The Box it came in - so nobody can say I really didn't build it!

The Box it came in - so nobody can say I really didn't build it!

  • 0
  • 3
Jeff O

Weber 118 Champ Kit

This is a pictorial log of the Weber 118 Champ Circuit (5F1) Kit I just built.

The cabinet is actually 2" taller then a standard champ, but it was a second, so cheaper, and actually eliminates some of the boxy sound.
Click to expand...
There are no comments to display.

Album information

Album owner
Jeff O
Date created
Item count
19
View count
2,770
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

Jeff O

Jeff O

Media items
48
Albums
3
Can view media items
Everyone
Can add media items
Album owner only

Share this album



Latest posts

Top