Hello all!

Discussion in 'New Member Intros' started by finalstatic, Nov 14, 2019.

  1. radd

    radd Country Gent

    Dec 27, 2017
    Santa cruz
    Typical Bigsby fix

    A well dressed, very well dressed and lubed nut
    Locking string wrap with a bare minimum of wraps
    No thinner than 10’s for strings
    Generally not dive bombing the Bigs.

    Other things I have done, reduce the break angle off the bridge with nylon washers under the Bigs.
    Installed a Bigsbyfix
    Installed a high quality roller bridge like the ABM2400

    I also take the tension bar off and lube all the nylon bushings with Tri-Flow. This is on an import Bigs such as a B50

    Out of all that, the nut and locking string wrap are the two most important

    Good luck
    Last edited: Nov 16, 2019
  2. radd

    radd Country Gent

    Dec 27, 2017
    Santa cruz
    A couple of example pics, roller bridge, nylon washers raising the Bigs and the locking string wrap

    6BAFE932-387E-48FF-B155-CA235138E957.jpeg 907B27FE-0E19-48A5-94B2-178B42A1E359.jpeg 59602F04-415E-4589-B798-D8C4597CFE4D.jpeg
IMPORTANT: Treat everyone here with respect, no matter how difficult!
No sex, drug, political, religion or hate discussion permitted here.

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice