I need to tuck 2 or 3 guitars into my little music corner against the wall so that they have a chance of survival in a house with two young grandchildren, 1 cat and 2 1/2 dogs. I have a space about 20” wide. The guitars will only be there when I’m playing. One of the designs I pulled off the net. I’m combining a couple ideas just using the photos as a guide. What must be pointed out at this point is the fact that I’m not a woodworker, I just tinker and have fun. Main pieces cut Everything clamped together for a test fit....ok so far. Practice cut on a scrap piece to check the top slot for the guitar necks.