Separate names with a comma.
yes, the roller, now being smaller in diameter applies less break angle at the bridge, and the bearing mounted roller is very smooth.
Great guitar! I love the red sparkle, and you got the premium case along with it. Well done!
The chinese ones also have a laurel fret board...and are $800
MF still has some black Korean made guitars with the hilotrons & rosewood
I say "Oops" because I didn't plan on buying that guitar today...but it just so happened the deal came up, and I felt it was time to act!
Very nice! My 5420T is orange and Korean as well. I'm not so keen on the specs of the newer ones.
I have a B70 on an Eastman T486B. The Bigsby has been an issue even after nut work and a roller bridge. I took the roller off, and measured the...
Thanks! Price was right too
installing a nut and fitting a nut are 2 very different things
Pretty inexpensive, too!
That's beautiful! I love the red sparkle!
I like a good pin up girl any day, and now I used some of my girlfriends gel coat nail polish stuff to accent the knobs. My old cell phone camera...
Mine was made in April of 2017. It's a fine guitar regardless of its price.
Agreed. The saddle grooves required some polishing to allow the strings to glide
The nut slots may need to be cut deeper...
Well, last string change I went back to the original spring. I found the soft spring a bit too soft for my style
That's a good idea for those not comfortable with power tools. I was a tool & die maker for 38 years so I am fearless ;)
YES! All I remembered was that you were from France, and recommended the reverse audio pots. Thank you for posting it
1st, I measured the angle that the bridge was at, which was 1 and a 1/2 degrees. I machined the bottom of the bridge, specifically the...
I read this info here, but figured I'd pass the torch in case anyone missed it.
I have a 5420T. The stock factory individual volume knobs act as...
Nice guitar, that green 5420, as is the Penguin!
Thanks Michael. I was looking at these from Guitar Fetish,...
I, too want to experiment with the volume controls. There is a member here from France who used REVERSE taper audio pots for the volumes, and...
Who makes that bridge?